Specifications

HTP Spool Guns
The HTP RSG250 Spool Gun is the perfect solution when
you need some extra distance between you and the
welding machine. This state-of-the-art gun, available in 25’
and 50‘ lengths, is ideally suited for applications ranging from
farm machinery and semi-trailer repair to construction site
jobs or any other application where the power source can’t be
brought to the work.
This advanced HTP gun is also an excellent solution for
welding aluminum. The distance from the drive rollers to the
contact tip is only 8", so feeding problems and bird’s nesting
are virtually eliminated.
The RSG250’s unique contact tip is notched, so burn backs can
be easily removed. What’s more, the tip is also offset for
maximum electrical current transfer, resulting in a smoother,
more stable arc.
A remote wire feed adjustment in the RSG250’s handle is a real
time-saver. It eliminates the time-consuming walk all the way
back to the welder to fine-tune your wire feed rate.
The RSG250 includes a control box and can be installed on
virtually any brand of MIG welder.
Have an engine driven arc welder with a CV setting and want
to MIG weld aluminum in the field? Then the HTP RSG250-C
is your answer. The control box has a contactor and can be
installed on any engine drive with a CV setting.
The RSG250-HTP fits our MIG 140, 160, 160DV, 200 and 240.
This unit is easily wired into HTP welders and does not require
a control box. The RSG250-2400 offers the same advantages,
but is designed for the MIG 2400.
50’ guns available by special order.
MIG Welders and MIG Welding Accessories
22
Wire Feed
adjustment
in handle
Notched contact tip
RSG250
RSG250-C
RSG250-HTP
RSG250-2400
RSG250-MIL14
Fits All Welders
Fits CV Engine Drive Welders
Fits HTP 140, 160, 160DV,
200, 240, 2400-ST-24
(Newer model, purchased Dec 2012 and later)
Fits HTP 2400
Fits Miller Welders
List25’ Spool Guns
$1224.95
$1264.00
$995.00
$995.00
$1329.95
Sale
$735.00
$889.00
$635.00
$635.00
$835.00
Specifications RSG250 RSG200
Amperage
Weight (gun only)
Weight (gun & cable)
Length
Wire Feed Rate
Wire Size
Wire Type
Spool Size
60% @ 150 amps
2 lbs.
12.6 lbs.
20 ft.
20-410 inches/min
60% @ 250 amps
2 ¾ lbs.
14 lbs.
25 ft.
50-650 inches/min
.023", .030", .035", .045" *
Steel, Stainless, Flux Cored, & Aluminum
Standard 4" Spools
The RSG 200 is an economical
alternative to the HTP RSG250.
The RSG200 works with all HTP
welders with quick connect welding
guns. The wire feed adjustment is
on the front of the welder. The RSG
200 handles .023", .030" and .035"
wires, and with a 60% @ 150 amp duty cycle, the RSG 200 will
make your aluminum projects easier and eliminate wire feed
problems.
RSG200
RSG200-MIL Fits Miller Welders
List $699.00
List $699.00
Sale $415.00
Sale $415.00
When extra length is required for those special jobs.
*RSG 200 does not use .045" wire
800-USA-WELD | www.USAWeld.com