Specifications

HTP Welding Aids
Accessories
32
HTP Nozzle Spray - 2 Per Pack - #12021 $19.95
If you own a MIG welder (any MIG) Nozzle Spray is a must.
Prevents costly spatter build-ups on nozzles, tips, and swan necks.
Not a silicone product, but a specifically designed anti-spatter
formula.
HTP Nozzle Gel - #12024-16 $10.00
Our HTP Nozzle Gel is the best anti-spatter material we’ve ever
offered. Now available to you in a 16 oz jar! The HTP Nozzle Gel
lubricates nozzles and tips, preventing spatter build-up for longer
nozzle life. Dip your hot nozzle in the gel as you weld and spatter
just taps out! This blue odorless gel is firm and stays put during
high temperature use, even sideways or upside down. We
recommend this sensible product to all MIG welders.
HTP Prime-A-Weld Zinc - 2 Per Pack - #12022 $29.95
Auto workers and metal men for years have used hot dip zinc
to slow or stop corrosion. Prime-A-Weld is 95% zinc blended
with 5% epoxy resin to produce one tough film. Regular paints
can’t hold up or bond properly to metal – they are just coatings.
Prime-A-Weld zinc-rich treatment actually welds through and
chemically fuses to the work surface. Rust doesn’t even have a
chance to start.
Prime-A-Weld has complete weld-through capability and won’t
interfere with spotwelds like undercoat paint or plastics. Perfect
for rockers, blind panels found on antique restoration, or today’s
unibody cars. We are proud of this fine product. HTP Prime-A-
Weld zinc meets or exceeds all performance requirements
including the following specs: MIL-T-210335, repair for hot dip
galvanizing, MIL-P-346105-Weld thru primer, and the Preece test
for hot dip galvanizing. Remember, if it won’t meet or beat all
these requirements, it simply won’t work properly. You invest your
valuable time and energy, the least we can do is provide the best
product for your needs.
Stainless Steel Wire Brushes
These are an absolute must when welding aluminum. Regular
steel wire brushes contaminate the aluminum and can cause poor
results. Stainless steel brushes will ensure the weld surface is as
clean as possible. Available in small and large sizes.
40110 - Stainless Steel Wire Brush (small) $4.95
40112 - Stainless Steel Wire Brush (large) $8.00
HTP Super Heat Sponge #12084-32 $35.00
Have you ever welded or heated an area of your prized auto, a
customer’s car or a metal project you were working on only to
remove your helmet to find warped metal, discolored paint or
broken glass? What was the cost of the damage?
We have a new solution … HTP Super Heat Sponge!
HTP Super Heat Sponge works like magic to absorb heat and
provide a protective barrier to stop the damage excessive heat
can cause. Apply on the backside of the weld area as well, to
reduce discoloration and distortion on lightweight metal. HTP
has always had a Heat Sponge product; however, our new
reformulated Super Heat Sponge absorbs even more heat.
It’s easy to use. Spread a liberal amount around the work area,
now you can start to weld, braze, or solder. Super Heat Sponge
will soak up the dangerous heat next to your finished work. The
paste is dried out in the heat exchange and your metal is
protected from the heat. Wipe off and put it back in the can.
Super Heat Sponge is reusable and can be used again and again.
Rinse the work area with water and you’re done. Apply Super
Heat Sponge to finished surfaces to protect from heat damage or
weld spatter. HTP Super Heat Sponge works for lead applications
near gaskets or windows, use it vertically, horizontally, or
overhead. Non-toxic, safe for all skin contact, produces no odor.
HTP Super Heat Sponge is user friendly, environmentally safe,
and 100% biodegradable. Available in 32oz. jars. Add up the
advantages: eliminate discoloration, distortion and breakage,
save costly tear down and reassembly, save time and money.
800-USA-WELD | www.USAWeld.com
Welding safely is a top priority here at HTP, so wearing the
proper protective garments is a must! Our green welding
jacket measures a full 30" in length, from base of collar to
bottom hem, for complete coverage. Constructed of durable
9.5 oz/sq. yd., flame retardant, 100% cotton sateen with
non-reflective snaps at the sleeves and front for safe, secure
closure and features an inside lapel pocket measuring a handy
6" x 5". More comfortable than leather, this lightweight
jacket will keep you both cool and safe! You’ll quickly agree
that it provides the ultimate in protection and comfort.
Machine-wash and dry, or can be dry-cleaned.
HTP Flowmeter #12020-F
List $89.95 | Sale $35.00
For those who want a more
accurate gas delivery system,
the HTP flowmeter is the
answer. Perfect for all TIG and
MIG welding applications, the
HTP flowmeter is an economi-
cal alternative for the demand-
ing customer who wants more
precise gas metering. The HTP
Flowmeter has a CGA-580 tank
fitting so it will screw right into
Argon, Argon/CO2, and Helium
tanks. The square polycarbon-
ate flow tube reads from 10 to 60 CFH. The single stage
regulator has a large 1 ½" diameter pressure gauge which
reads from 0 to 4000 psi, so you know how much is left in your
tank. The HTP Flowmeter is backed with a 2-year warranty,
and provides reliable performance at an affordable price!
HTP Leather
Welding Gloves
Natural leather is the best
protection against heat,
sparks, and spatter.
HTP’s Leather Gloves
are strong and
comfortable, and
extra long to protect wrists.
#12550 $13.95
Clecos #99160 List $59.00 | Sale $40.95
For fabricators and racers, nothing works better to hold
metal in place prior to welding than Clecos. They’re actually
removable rivets. Place the panel in position, drill a ˝ or ˝
hole, and using the installation tool, insert the Cleco thru the
hole. The two panels are now tightly held together. Clecos are
reusable, and they’ll be your “third, fourth and fifth hands” for
years to come. Kit includes ten ˝ clecos, ten ˝ clecos,
two edge holding clecos, and the installation tool. Comes
complete with handy carrying case.
33
Accessories
Welding Jacket XL $36.25
Welding Jacket XXL $38.88
HTP 55 Cubic Foot Gas Bottle
Gas Bottles
• 55 Cubic Foot Capacity for
3 to 4 hours of welding
• 99900 rated 3A1800 (1800 PSI
Max pressure w/5% overfill)
• 99900-2015NC rated 3A2015
(2015 PSI Max pressure w/5% overfill)
• Valved CGA 580 for Argon/CO2 mixtures,
Refillable
• Give your gas supplier the
specifications to make sure they
will fill customer owned bottles.
99900 $135.95 $100.00
$160.00
99900-2015NC $240.00
Buy two
so you always
have a
full bottle
on hand!
List Sale
1
8
1
8
3
16
3
16
Free Shipping - All Orders Over $35