Specifications

HTP Auto Body
Tools
Auto Body Tools
34
HTP Stud Setter Kit - #12010
List $479.95 | Sale $365.00
Pull dents with professional results . . . and a whole lot more!
This completely portable unit lets you work anywhere. Tests in
bodyshops show that the Stud Setter can reduce labor costs by
40% to 80%.
Attach the tip for stud welding, insert studs, pull the trigger,
and electrically weld the stud to the dented panel. Attach the
slide hammer to the stud and pull the dent, or attach a row of
studs and use a clamp and “Come Along” for big dents. Each
stud provides about 500 pounds of pull strength, but can be
easily ground off without heat distortion. The Stud Setter
makes quick work of hail dents and door dings.
Weld studs to cold-rolled, high strength, galvanized and
stainless steels – all without making holes or removing inner
panels.
Another use for your stud setter is the installation of trim
rivets. Many late model cars require these fasteners. Simply
attach the trim rivet tip, place a trim rivet in the magnetic tip,
hold the gun tip to your scribed line, pull the trigger, and
“ZAP”, you’re done.
On the vehicle, you can shrink stretched metal with clean instant
electric heat exactly where you want it, then hammer and cool
with a wet rag – continue until done. Get rid of “oil can” areas
and reduce high spots. It’s great for hard-to-reach places,
overhead or at any angle, on 26 gauge through 16 gauge.
A great buy even if it did one job well . . . an incredible value to
you because it does three jobs extremely well. Complete step
by step instructions enclosed.
Entry Level Stud Setter Kit – 12010ECB
List $349.00 | Sale $214.00
Pull dents with professional results! This is just like our HTP
Stud Setter Kit, #12010, which allows you to pull dents without
drilling holes. This H&S Stud Setter lets you electrically weld the
stud to the dented panel, attach the slide hammer, and pull the
dent! It’s that simple! Each stud provides 500 lbs. of pulling
power. With optional accessories you can also weld trim rivets
and shrink! The Entry Level Stud Setter kit includes the Stud
Setter Gun, slide hammer, stud welding tip, and 100 studs.
Dent Puller Kit – 12015-B List $99.95 | Sale $84.00
Originally built for the bodyshop and now available to you
to get professional results at home. It works so easily anyone
can lift out dents and save hundreds in repair bills. Here’s all
you do; set your HTP or other MIG Welder to the proper heat
range, install your stud weld nozzle (#15007), place a stud in
the guide, hold gun and nozzle at an angle so that the stud is
90 degrees to the work surface, and in spot weld mode, just
pull the trigger and you’ve set the stud.
Now attach the slide hammer to the stud and pull, or put
several studs on and use other clamps and pull devices.
The perfect accessory for those hard-to-pull dents. No more
drilling holes: a real solution, not a patch. You won’t know how
you did without it! The HTP Dent Puller Kit comes complete
with slide hammer, 500 studs and stud welding nozzle.
Kit includes:
1 HTP Stud Setter
1 Slide Hammer
1 Stud Welding Tip
1 Steel Service Tray
1 Box 250 Studs
1 Box Trim Face Rivets
1 Shrinking Tip
1 Trim Rivet Tip
Stud Setter replacement tips are also available individually:
#12012 Shrinking Tip for Stud Setter $14.95
#12013 Stud Welding Tip for Stud Setter $14.95
#12014 Trim Tip for Stud Setter $21.95
#12038 2.0mm Studs Box 500 $19.95
#12039 2.6mm Studs Box 500 $19.95
#12037 Trim Rivets $19.95
See #12015-B (at bottom right of this page)
if you own a MIG before purchasing this tool.
800-USA-WELD | www.USAWeld.com
35
Auto Body Tools
A. HTP Spot Mill - #90150
List $449.00 | Sale $267.00
Imagine the best spot weld removal tool you can. It would
have to drill out spot welds quickly and be able to remove spot
welds without drilling through both panels. It would have to
be easy to start, without a center punch and not walk around
the panel. It would have to have a long lasting drill bit. Well,
you’ve just imagined the HTP Spot Mill. This unique tool has a
hardened cobalt steel bullet point drill bit. It’s actually more
like a bit found in a Bridgeport milling machine. The depth of
cut is set by turning the adjusting ring, so you can set the tool
to only cut through the upper panel. The high torque, low
RPM drill motor cuts out spot welds quickly, and without
overheating the drill bit, which results in long drill life. Best of
all, with the HTP Spot Mill, you can remove spot welds without
having to access both sides
of the panel. You know
what a problem spot weld
removal is. The HTP Spot
Mill solves that problem
quickly, easily, and
efficiently. The HTP Spot
Mill is the spot weld
removal tool you’ve been
waiting for.
Includes rugged molded
case, 4 replacement cutting
bits, regulator
and oiler.
HTP Spot Weld Drill Bits - Made of top quality,
German tool steel, this high-speed steel is mixed with a special
cobalt alloy (EMO5-CO5), resulting in drill bits that can be
expected to last twice as long as standard high-speed steel
bits. Tests in our 90150 HTP Spot Mill have resulted in over
100 spot welds removed. These advanced HTP drill bits also
work great in any other spot weld cutter.
Measuring 1 ¼" long x " diameter,
they can be used in any drill which runs
between 700 to 1800 rpm. Of course, as
with any cutting tool, use of a cutting oil
will greatly increase the life of the tool.
A) 90151 -10TIN - This HSSE bit contains special cobalt alloy and
is coated with space-age Titanium, which gives the bit its gold
color. This bit lasts three times longer than our 90151 HSSE
cobalt bit, and features a 10mm diameter cutting face.
List $34.95 | Sale $22.90
B) 90151 - This HSSE bit contains special cobalt alloy and lasts
twice as long as HSS bits. This bit has an 8mm diameter cutting
surface. List $14.95 | Sale $11.25
C) 90151-TIN - You know these bits are different the minute
you look at them. We took our HSSE cobalt alloy bit and coated
it with space-age Titanium, which gives the bit its gold color. The
durable, titanium coating on these bits makes them last three
times longer than our 90151 HSSE cobalt bit. This bit has an
8mm diameter cutting surface. List $24.95 | Sale $16.25
D) 90151-MAX2U - These are the highest quality spot weld
drill bits – Both Titanium Coated and Carbon Nitrited, this
exceptional coating is extremely hard while offering a very low
coefficient of friction, so it runs cool. The bit’s purple color
comes from the carbon nitriting process, which makes this bit
last 10 times longer than the standard HSS bit. Featuring a
Rockwell Hardness of 96 and max temp rating of 1600 degrees,
you can use the MAX2U bit dry or with cutting oil. This bit has
an 8mm diameter cutting surface. List $32.95 | Sale $21.65
E) 90151-3 - This is truly the top of the line. If you are
working on late model, uni-body vehicles (Daimler/Chrysler,
Porsche, Audi, Volvo, BMW, just to name a few) using very high
strength, extremely hard Usibor or BTH steel, then you need this
cutter or a plasma cutter to cut through these exceedingly tough,
ultra-hard materials. This spot weld drill bit features a special,
three-fluted design and combines all of the benefits of TiN, TiAN,
and TiCN coatings. Watch it cut through these unusually hard
steels while other drill bits just dull. Not recommended for use in
a drill, but are designed specifically for specialized spot weld
cutting tools. This bit has an 8mm diameter cutting surface.
List $65.95 | Sale $51.25
A B C D E
5
16
Free Shipping - All Orders Over $35