User manual

26
USER MANUAL DCB-101
SECTION 9
RECORDING A DIGITAL PROGRAMME
Start the digital-box and select a digital programme.
Recording via scart-lead. Select AU-mode on your VCR to record the
programme received on your digital-box. (See information box)
Recording via coaxial (UHF) –cable. Select the channel number on
your VCR where the digital-box
output channel is saved.
RECORDING BASIC PROGRAMMES (analogue programmes)
Start the digital-box and select a basic programme.
Recording via scart-lead. Select AU-mode on your VCR to record the
programme received on your digital-box. (See information box)
Recording via coaxial (UHF) –cable. Select the channel number on
your VCR where the digital-box
output channel is saved.
The digital-box in stand-by
Receive and record directly on the VCR. Select desired pre-programmed
analogue channel on your VCR.
RECORDING A DIGITAL PROGRAMME AND AT THE SAME TIME
VIEW A BASIC ANALOGUE PROGRAMME
Start the digital-box and select a digital programme.
(Do not switch channel during the recording)
Recording with coaxial (UHF) -cable
Select the channel number on your VCR where the digital-box
output channel is saved and start the recording.
Select the basic analogue channel you wish to view using your TV-remote.
Recording with scart-lead
Select AU-mode on your VCR to record the programme received on
your digital-box. (See information box)
Switch to TV-mode with the TV/VCR-key on your digital-box remote.
Select the basic analogue channel you wish to view using your TV-remote.
RECORDING A BASIC ANALOGUE PROGRAMME AND AT THE
SAME TIME VIEW A DIGITAL PROGRAMME
Recording with coaxial (UHF) -cable
Start the digital-box and select a digital programme.
Select desired pre-programmed basic analogue channel on your VCR
and start the recording.
Select desired digital programme to view using your digital-box remote.
Recording with scart-lead
Start the digital-box and select a digital programme.
The digital programme will automatically be shown on your TV-screen.
Select desired pre-programmed basic analogue channel on your VCR.
(See section 2)
Start the recording.
1
2
3
4
VCR recording
INFORMATION BOX
The AU-mode can be named
differently on various TV and VCR
remote handsets. Following are the
most common names:
AU/0
AV (A1 and A2)
Line in (L1 and L2)
Key 0 on the remote