SOLAR POWERED SLIM BLUETOOTH KEYBOARD FOR MAC User’s Guide esc :Fn+esc F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F11 F12 F13 delete Pair: Fn+P F14 F15 F16
Table of Contents Introduction 1 Package Contents 1 System Requirements / Technical Support 1 Macally Product Information 1 Hardware Basics 3 Fn Key, Fn Lock Mode and Shortcuts 4 Pairing the keyboard with Mac 6
Introduction The Macally BTSOLARKEY is a stylish Bluetooth solar keyboard, especially designed for Mac. It has 110 full size, thin and quiet Scissor-Key-Switch™ keycaps for a sensitive and responsive touch. It also has 21 convenient preset shortcut keys for one-touch control of Mac applications and a 17-key numeric keypad to quickly and efficiently enter long sequences of numbers. The built-in solar panel constantly charges internal Li-ion battery under any indoor or outdoor light.
Macally Product Information This manual is furnished under license and may be used or copied only in accordance with the terms of such license. Except as permitted by such license, no part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or any means, electronic, mechanical, recording, or otherwise, including translation to another language or format, without the prior written permission of Macally Peripherals.
4 SOLAR PANELS esc :Fn+esc F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F11 F12 F13 delete Pair: Fn+P ON/OFF Switch 3 F14 F15 F16
Fn Key, Fn Lock Mode and Shortcuts 1 On/Off switch 2 Power Indicator 3 Bluetooth / Pairing Light Indicator 4 Caps Lock Indicator 5 Pairing Keys: Press Fn and P simultaneously 1 4 3 2 esc :Fn+esc F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F11 F12 F13 F14 F15 F16 delete Pair: Fn+P 5 5 5 The first time using with a Bluetooth device, pairing is needed. Press Fn and P keys simultaneously, the pairing LED will blink indicating the keyboard is in pairing mode.
Shortcut Mode and Keys Shortcut mode - Shortcut mode is the default mode.If Fn and esc keys are pressed together, keyboard is in Fn Lock mode. You can press Fn and esc keys together again to toggle back to Shortcut mode.
Pairing the keyboard with Mac 1. For the first time use, pairing is required. Press Fn and P keys simultaneously to set keyboard in pairing mode, the Pair LED flashes green. esc :Fn+esc F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F11 F12 F13 F14 F15 F16 delete Pair: Fn+P 2. Please click the Bluetooth icon in your computer’s menu bar located in upper right corner of your screen. Make sure Bluetooth is turned to On then select “Open Bluetooth Preferences ...” in the drop down menu.
3: Bluetooth window displays a found Macally Bluetooth keyboard, please click on the “Pair” button next to it. 4: Once pairing is finished, the Bluetooth keyboard shows “Connected” status.
5. When Mac prompts you a message, “The keyboard can not be identified...“ please follow Keyboard Setup Assistant guide to identify keyboard as shown below.
6. Select ANSI option, and click on Done button. Please note that if you are using a different Apple OSX version, your screen may differ from the above diagrams.
