Instruction manual

6
USING 3D “ANAGLYPH” GLASSES
When you enable 3D Glasses in the Video Config dialog the entire game will be rendered such
that you must use anaglyph glasses to see what’s going on. Be sure that the red filter is over
the left eye, and the blue/cyan filter is over the right eye.
RED/CYAN
These are the best type of anaglyph glasses to use, and these are what come in the boxed
version of Nanosaur 2. Red-Cyan glasses work extremely well with LCD displays. When
used with CRT monitors, there will be more ghosting, so you might want to consider using
Red/Blue glasses (see below) if you’re on a CRT.
Testing Red-Cyan Glasses
Not all Red-Cyan anaglyph glasses are created equal. If you have a good pair of Red-Cyan’s
then the red text below should not be visible in the right eye, and the green text should be very
dim in the left eye.
Where to Buy the best Red-Cyan Glasses
The glasses that we’ve had custom made for the boxed version of Nanosaur 2 have been
specifically calibrated for Apple LCD displays, and they work better than any stock glasses
that we’ve found. But buying the boxed version of Nanosaur 2 is not the only way to acquire
these glasses. The company that manufactures our custom red-cyan glasses also sells them.
For $10 they will mail you 2 pairs of our custom glasses, so to place an order visit them here:
http://www.rainbowsymphony.com