Installation Guide

RJ45 Ethernet Port
Use optional RJ45 cable to link WIFIHDD to another router/switch to connect WIFIHDD to the internet.
This is very handy or sometime the only internet option in hotel room etc.
Micro USB 3.0 Port
The built-in Micro USB 3.0 is for faster data transfer and charging the internal battery when connected
directly into the computer’s USB port or wall chargers. This works only under Power Off mode.
Reset Button and Default Settings
To reset to factory settings, such as WiFi network name, WiFi password, Admin password, IP address
etc., while WIFIHDD is powered on in Wireless mode, use a paper clip to press Reset button for 5
seconds. Then let WIFIHDD reboot automatically to restore to default settings. Below is default factory
settings:
LEDs
Battery LED:
LED Off: Battery full or Drive off

On: Drive on
Slowly flashing: Battery charging
Flashing Fast: Product shutting down
Red Color:
Solid Light: Low battery
HDD LED:
LED Off: The product is switched off
White LED:
Host name
WiFi network name(SSID) WiFiHDD-xxxx
IP address
WIFIHDD
WiFi password 12345678
Admin password (blank)
10.10.10.254
9