Installation Guide

Solid Light: Stand-by

Connected into USB 2.0 Port

Flashing: Read/Write activities

Blue LED:

Solid Light: Connected into USB 3.0 computer

Flashing: Read/Write activities

Wi-Fi LED:

Blue Color:

Flashing: Starts the Initialization process

Solid Light: Initialization process completed

Ready to use

LED Off: The device is switched off

Internet LED:

 

No LED: No connection established

5. Hard Drive Installation

Note: If the WIFIHDD comes with a pre-installed hard disk drive, please go to Section 6. Hard drive



up to 9.5mm in height.

5.1 Separate the top and bottom enclosure and the metal hard drive tray. Remove the four screws and

rubber shock mounts from the plastic bag.