Installation Guide

Wireless Access Mode

After selecting Wireless Access mode, all available Wi-Fi Network would be listed. Select your previ-

ously used network Access Point and input correct password, then tap on “Join” button. Once a check

mark appears in front of the selected Wi-Fi Network, it indicates Wi-Fi Access Point to internet is set up

successfully. WIFIHDD internet pass-through set up is completed, Internet LED on WIFIHDD will light up

green, user may test internet connection via iOS or Android web browser.

Wired Access Mode

When Wi-Fi Network Access Point is not available, the Ethernet port in WIFIHDD comes in handy. First,

make sure a RJ45 Ethernet cable is plugged in securely between WIFIHDD Ethernet port and your inter-

net router or network hub, as shown below.