Installation Guide

Click OK to confirm change and return to main screen of WiFiStor. Next, user needs to manually restart

WIFIHDD by turning off WIFIHDD and turning power back on.

Please note, during WIFIHDD restart, your phone or tablet will probably switch to other Wi-Fi Network

automatically. After WIFIHDD is fully restarted, user needs to change Wi-Fi network back to WIFIHDD in

phone or tablet. Then launch WiFiStor again, go to main screen, select Settings, “Wired Access” should

be displayed under Internet Settings.

Tap “IP Settings” under “Configure your network connection”, IP settings, such as IP address, Subnet

-

enabled Router available in user’s local network. Please see example below. Tap “Set” to save, “Back”,

and “OK” to return to WiFiStor main screen. WIFIHDD internet pass-through set up is completed, Internet