Installation Guide



allowable SSID length.

： The default setting is set to Auto. There are 13 channels available to choose from.



(802.10b), 54Mbps (802.10g) and 150Mbps (802.10n).

： The None, WPA-PSK, WPA2-PSK, Mixed WPA/WPA2-PSK (default) are available.

： Minimum 8 (Maximum 63) characters.

： The default IP address is set to 10.10.10.254 with subnet mask of 255.255.255.0.

The IP address can be changed.

Click on the “Next” button to change the admin default password. Click on the “Next” button once the

password has been modified. You may click on the “Skip” button to keep the default password.

After finishing the startup wizard the system will start rebooting. This process will take 2 minutes (see

picture below).