User's Guide

Pairing the MBTBUDS with Windows
NOTE: The MBTBUDS may not be fully charged
when you get it. Please make sure you charge
them If the sync LED does not flash during pairing.
1. Separate the ear buds and make sure the
Bluetooth sync LED is flashing red/white. If it’s not,
press and hold the sync button on the headset for
three to four seconds until it flashes.
2. Open your windows Bluetooth settings and click
on “Add a device”.
3. From the Add a device screen, wait for
MACALLY MBTBUDS to show up then double click
on “MACALLY MBTBUDS” and wait for windows to
finish installing the driver.
NOTE: It may take up to a minute for the ear buds to
show up on the screen. Once paired the ear buds
will automatically turn off when magnetically
placed together and automatically turn on and
connect to your Windows PC.