LED CCTV Security Surveillance Monitors A Genuine Mace® Accessory 17" 19" User Guide
1 Introduction and Package Contents Congratulations on your purchase. You can expect only the sharpest and most brilliant color images from this security surveillance monitor. Featuring simple OSD controls and built-in speakers, you will find this monitor both easy to use and a pleasure to look at.
Specifications Model Number: Video inputs MAC-MON-17LED (1) HDMI, (1) VGA, (2) Composite BNC Video outputs Audio inputs MAC-MON-19LED (2) Composite BNC (1) VGA PC Audio, (2) RCA Composite Audio Speakers 2 × 1.
VGA Timing Item Resolution H Freq. (kHz) V Freq. (Hz) 1 640 × 400 @ 70 Hz 31.460 70.080 2 640 × 480 @ 60 Hz 31.469 59.940 3 640 × 480 @ 72 Hz 37.861 72.809 4 640 × 480 @ 75 Hz 37.500 75.000 5 720 × 400 @ 70 Hz 31.460 70.080 6 800 × 600 @ 56 Hz 35.156 56.250 7 800 × 600 @ 60 Hz 37.879 60.317 8 800 × 600 @ 72 Hz 48.077 72.188 9 800 × 600 @ 75 Hz 46.875 75.000 10 1024 × 768 @ 60 Hz 48.363 60.004 11 1024 × 768 @ 70 Hz 56.476 70.069 12 1024 × 768 @ 75 Hz 60.
2 Monitor and OSD Control Your LED color monitor has a simple button layout for controlling the monitor and OSD (On Screen Display) functions.
3 OSD Control OSD Menu: Picture Mode Picture Mode Press � /◄ or + /► to select Picture Mode User | Standard | Movie | Vivid Contrast This is used to set the brightness of the screen. Press � /◄ or + /► to adjust the parameter. Brightness This is used to adjust the image contrast. Press � /◄ or + /► to adjust the parameter. Tint This is used to adjust the image Tint. Press � /◄ or + /► to adjust the parameter. Saturation This is used to adjust the image saturation.
OSD Menu: Settings Mode AV/HDMI Mode VGA Mode Language Press � /◄ or + /► to select language H.
OSD Menu: PIP/POP Setup Mode PIP Multi-Window Press � /◄ or + /► to select PIP | POP | Off Sub Source Press � /◄ or + /► to select AV | VGA Size Adjust the size of Sub Source window Press � /◄ or + /► to select Large | Small Position Move the position of Sub Source window Press � /◄ or + /► to select position LU | RD | RU | LR Border Color Choose the border color of Sub Source window Press � /◄ or + /► to select color Black | Blue Sound Source Press � /◄ or + /► to select “Main, Sub” mode Swap
4 Caring for your LED Security Monitor The monitor is a sensitive piece of electronic equipment. Proper care can prevent accidental damage to the LED panel or the monitor itself. By following these guidelines you can ensure many years of trouble-free use. 1. The LED monitor’s casing and LED glass panel can be cleaned with a soft, lint-free cloth.
5 Frequently Asked Questions Power button does not respond • Check the power cord to ensure that it is securely plugged into the monitor base and also into the electrical outlet. • Ensure there is electrical power coming from the AC outlet. Use another device to check for power. • Unplug the power cord of the monitor from the AC outlet, wait a few minutes, then to plug the power cord into the AC outlet again. This will reset the monitor and power supply.
6 Regulations & Maintenance FCC Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
► Plugs — Do not remove any of the prongs of the monitor’s three-pronged power plug. — Disconnect the power plug from the AC outlet under following conditions: • If you will not use it for an indefinite period time. • When the power cord or plug is damaged or frayed. • If the product does not operate normally when the operation instructions are followed. Adjust only those controls that are covered by the operating instructions.
5101 NW 21st Ave, Suite 210 • Fort Lauderdale, FL 33309 www.mace.
