MacePro™ MPC-IP-BOX Q U I C K S TA R T GUIDE 5101 NW 21st Ave, Suite 210 • Fort Lauderdale, FL 33309 www.macepro.
Full HD IP Camera Quick Guide The Quick Guide is for quick installing and connecting the Full HD IP Camera. For details, please refer to the IP Ethernet Cable Connection Camera’s User Manual. Connect one end of the CAT5 Ethernet cable to the RJ45 connector of the IP Camera, and the other end of the cable to the network switch or PC. Camera Rear Panel NOTE: In some cases, you may need to use an Ethernet crossover cable when connecting the IP Camera DC 12V/ PoE directly to the PC.
Install the ActiveX Control • After connecting to the IP Camera, the request for installing the ActiveX control will appear just below the URL bar. • Right Click on the information bar, and press “Install ActiveX Control…” to permit ActiveX control installation. • In the pop-up security warning window, click “Install” to start downloading DC Viewer software on the PC. • Press “Finish” after DC Viewer installation is complete. Full HD IP Camera Quick Guide Ver1.