Installation guide

3 WALL MOUNT BRACKET INSTALLATION

3.1 Component Installation

Wall mount bracket is shown as below. See Figure 3-1.

Figure 3-1

3.2 Installation

3.2.1 Installation Requirements

The wall mount speed dome can be installed in the hard construction wall in the indoor or

outdoor environments. Before the installation, please make sure:

z The wall is thick enough to install the expansion bolt.

z The wall can at least sustain the 4x weight of the speed dome.

3.2.2 Installation Steps

Please draw four holes position in the wall according to the hole of the bottom of the wall mount

bracket. Then you can dig four holes and insert the expansion bolts (not provided). Use four hex

bolts and flat washer to fix the bracket in the expansion bolts. See Figure 3-2.

Figure 3-2

Installation

Hole