Installation guide

1.2.2 Install the transparent cover

First, you need to check the steel wire of the bracket is firmly secure or not.

Please line up the captive screws to the quadrate groove of the bracket and then push the

bracket into the internal enclosure. Fix these two captive screws. See Figure 1-3.

Figure 1-3

Now you can install the quick installation port. Please twist Teflon tape around the screw thread

of the quick installation port and turn it into the screw thread of the wall mount bracket. Use M4

stainless screws to secure firmly. See Figure 1-4.

Figure 1-4

Now you can begin the cable connection.

Connect the steel wire of the quick installation cover to the hook of the quick installation port.

Connect the reserved integration cable of the wall mount bracket to the corresponding power

cable, video output cable, RS485 control cable, alarm input/output port(if necessary) of the

multiple-function composite cable of the quick installation speed dome. Paste the insulating tape

in the connection position to do the proper waterproof work. See Figure 1-5.