Specification Sheet

Shenzhen Macroreer E-Business CO., LTD.
3/F, Building 57, DaYun Software Park, 20140806
HenGang ST, LongGang District, Shenzhen, P.R.C Zipcode: 518000 Ver.:1.0
Tel: [phone] Fax: [phone]
http://www.macroreer.com Email:[e-mail]
High-speed electrical interface, host-GBIC
Table 4. High-speed electrical interface, host-GBIC
High
-
Speed Electrical Interface, Host
-
GBIC
Parameter
Symbol
Min
Typ
Max
Units
Notes/Conditions
Single ended data input swing Vinsing 250 1200 mV Single ended
Single ended data output swing Voutsing 350 800 mV Single ended
Rise/Fall Time Tr,Tf 175
psec
20%-80%
Tx Input Impedance Zin 50 Ohm Single ended
Rx Output Impedance Zout 50 Ohm Single ended
General Specifications
Table 5. General specifications
General
Parameter
Symbol
Min
Typ
Max
Un
its
Notes/Conditions
Data Rate BR 10 1,000 Mb/sec IEEE 802.3 compatible.
See Notes 2 through 4 below
Cable Length L 100
m
Category 5 UTP. BER <10-12
Notes:
1. Clock tolerance is +/- 50 ppm
2. By default, the GE-GB-G is a full duplex device in preferred master mode
3. Automatic crossover detection is enabled. External crossover cable is not required
4. 1000 BASE-T operation requires the host system to have an SGMII interface with no clocks, and the module PHY to be
configured per Application Note AN-2036. With a SERDES that does not support SGMII, the module will operate at
1000BASE-T only.
Environmental Specifications
Table 6. Environmental specifications
Environmental Specifications
Parameter
Symbol
Min
Typ
Max
Units
Notes/Conditions
Operating Temperature Top 0 85 °C Case temperature
Storage Temperature Tsto -40 85 °C Ambient temperature