User manual

Controls

OUTPUT SECTION

Mute LED

Shows the mute status of the output band.

Mute key

Pressing a mute key will toggle the associated band output on and off. The

mute LED is illuminated when the output is MUTED. Mute status is saved

when a program is stored.

Output meter

Shows the output of each channel relative to the limiter threshold.

REAR PANEL

Mains power input

The Power inlet for the M20.06. Note that there is no On/Off switch for the

unit.

RS-232 connector

For connection to a PC for access to one or more units on a MIDI loop,

which provides an easy way to upload new software.

6 band outputs

The audio outputs are electronically balanced and floating.

Transformer balancing is available as a retrofit option.

Pin 1 Shield/Ground

Pin 2 Signal Hot (+)

Pin 3 Signal Cold (-)