User manual

Introduction 5
I NTRODUCTION 1
Thank you for selecting the Martin M20.06 Controller. The M20.06
Controller is a one unit loudspeaker management system, capable of
operating all speakers in the Mach product range. This digital circuitry is
based on BSS OMNIDRIVE™ DSP technology and comes equipped with
24-bit A-D and D-A converters. Fast and easy set-up of Mach speaker
systems is ensured by 50 pre-set programs with settings for all Mach
speaker models. Each preset offers carefully optimized crossover points and
slopes, polarity, delay and EQ settings to exactly fit the individual
characteristics of each Mach loudspeaker.
SAFETY INFORMATION
Read this manual before powering or installing the fixture, follow the safety
precautions listed below and observe all warnings in this manual and on the
fixture. If you have questions about how to operate the fixture safely, please
contact your Mach dealer.
This product is not for household use.
Do not removed the covers. There are no user-serviceable parts inside.
Refer all servicing to qualified service personnel.
This equipment must be earthed.
Use only a source of AC power that complies with local building and
electrical codes and has both overload and ground-fault protection.
Do not removed any of the protective earth, or signal cable shield,
connections. Such action is against recommended practise and will render
any EMC or safety certification void.