User manual

Quick start

UICK

START

1 - Connect AC power

The M20.06 has a universal voltage AC Power input. Connect the unit to AC

Power with the lead supplied. It will switch on automatically (there is no

separate on/off switch). The display will show the default screen, with the

name and program number of the current program. (This will be either the

last program recalled before the unit was switched off, or, in the case of a

unit with no stored programs, the default: 1 UNUSED)

2 - Attach audio connections

Connect the inputs and outputs as required. All inputs and outputs are

electronically balanced, with Pin 2 hot signal (+ve). Do not put any audio

through the unit at this time.

3 - Access pre-loaded program settings

The pre-loaded programs supplied in version 230701 are:

Program #: Supports

1 M12T and M182T

2 M15T and M182T

3 M30T and M182T

4 M154i and M182T or i

5 M129i and M182T or i

6 M156i and M182T or i

7 M12T full range ch 2+3+5+6

8 M15T full range ch 2+3+5+6

9 Slingshot 3 Way passive XO stereo. MS1262, MS118

10 Slingshot 4 Way mono. MS1262, MS118

11 Slingshot 5 Way mono. MS1262, MS15X2, M182T or MS118.

12 Slingshot 5Way mono. MS1262, MS15X2, Ballister SUB

13 M1502T active x 3 input A.

14 M1201T active x 3 input A.