User Manual

Page 5-24
200 BENCH PROCEDURES
Figure 5-24 — E7 Cylinder Head
Special Tools Required
앫 Valve Spring Keeper Remover J 29294-B
앫 Fire Ring Groove Cutter J 29600-C
앫 E7 Cutter Head J 37719
앫 Depth Gauge J 26948
앫 Valve Guide Remover J 37482
앫 Valve Guide Installer J 37809
앫 Valve Guide Reamer J 37481
앫 Valve Seat Extractor Kit PT6391
앫 Collet PT6390-4
앫 Valve Seat Insert Counterbore HT77136
앫 Valve Insert Installer Set J 38586
앫 Driver Handle J 8092
앫 Prussian Blue
앫 Model MST 50 Universal Spring Tester
J 22738-02
앫 Injection Nozzle Sleeve Extractor J 29880
앫 Basic Heavy-Duty Dowelout Kit PT6575
앫 Dowelout, Extractor (7/16 inch) PT6570-11
앫 Torque Wrench J 24407
앫 Slide Hammer J 2619-01
앫 Valve Yoke Guide Pin Installer J 29296
앫 Injection Nozzle Sleeve Installer J 29297
앫 Cylinder Head Core Plug Installer
(13/16-inch cup plugs) J 34684
앫 Cylinder Head Core Plug Installer
(1-1/16 inch cup plugs) J 34687
앫 Valve Seal Installer J 42453
앫 Valve Stem Seal Remover J 39460
200284a
5-101.bk Page 24 Friday, March 17, 2006 11:05 AM