User Manual

Page 7-22
200 SETUP AND ADJUSTMENTS
10. Rotate engine in direction opposite to
normal rotation until a reading of exactly
0.035 inch (0.889 mm) is indicated on dial
indicator.
11. Place a mark on the masking tape on the
vibration damper to align with pump timing
pointer.
12. Measure distance between the two marks
just made on the masking tape and place a
third mark exactly at the midpoint between
the first two marks.
13. Rotate engine in direction opposite to
normal rotation until engine timing pointer
aligns with the middle mark just made on
vibration damper. Remove masking tape.
14. If necessary, without rotating the engine,
realign pump timing pointer until it aligns
with the TC or “0” mark stamped on the
vibration damper.
5-101.bk Page 22 Friday, March 17, 2006 11:05 AM