User Manual

Page 1-4
200 GENERAL INFORMATION
Block 3 — ADR Regulations
앫 An “X” in block three means the engine has
been certified to meet Australian emissions
regulations.
앫 Two dashes in block three means the engine
does not meet Australian emissions
regulations.
Block 4 — Model Year
앫 The four-digit numeral stamped in block four
represents the year in which the engine was
certified.
Block 5 — Federal Family
앫 A two-digit numeral stamped in block five
denotes the Federal Family to which the
engine belongs, for emissions certification
purposes.
앫 All domestic engines will have a two-digit
Federal Family number in block five.
Block 6 — California Family
앫 If the engine meets California emissions
regulations, the same two-digit numeral
stamped in the Federal Family block is
stamped in the California block.
앫 If the engine does not meet California
emissions regulations, there will be two
dashes in block six.
Block 7 — Initial Injection Timing
앫 Block seven indicates the initial setting for
E7 injection timing.
앫 E7 EUP (E-Tech™) engines do not have an
initial injection timing, as this is controlled
electronically. E-Tech™ engines have “NA”
stamped in block seven.
Block 8 — Engine Brake
앫 This block is only used when the engine is
equipped with a Jake Brake. The stamping
in this block indicates the Jake Brake slave-
piston lash setting.
Figure 4 — Engine Information Plate
5-101.bk Page 4 Friday, March 17, 2006 11:05 AM