User Manual

Page 2-8
200 SPECIFICATIONS
Engine turnover bracket screw 40 54
Exhaust manifold-to-cylinder-head stud nut
10 mm 55 dry 75
12 mm 65 dry 88
Fan drive pulley to hub 40 54
Flywheel housing-to-cylinder block screw 170 231
Flywheel-to-crankshaft screw 185 251
Fuel filter bracket-to-inlet manifold screw 35 48
Hydraulic steering pump-to-timing gear cover stud nut 40 54
Injection line clamp bracket stud nut 40 54
Injection nozzle holder clamping screw (1991 and later) 45 61
Injection nozzle holder clamping screw (1989/1990) 45 61
Injection pump driven gear hub-to-injection pump shaft nut 200 dry 271
Injection pump driven gear-to-hub screw 40 54
Injection pump housing-to-Econovance assembly-to-cylinder block screw 40b 54b
Injection pump housing-to-Econovance assembly screw 40b 54b
Injection pump driven gear-to-Econovance outer shaft 40b 54b
Injection pump mounting stud nut (mechanical pumps) 40 54
Inlet manifold-to-cylinder head screw 40 54
Injection pump access cover capscrews 30 41
Injection pump rear support
Lower bracket-to-cylinder block screw 40b 54b
Upper bracket-to-injection pump screw 15b 20 b
Link(s)-to-lower bracket screw 40b 54b
Link(s)-to-upper bracket screw 40b 54b
Injection pump-to-adapter housing screw 40b 54b
Main bearing capscrew 210 285
Nozzle fuel inlet tube clamp screw (at cylinder head) 35 47
Nozzle fuel inlet tube nut (at cylinder head) 25 34
Nozzle fuel inlet tube nut (at pump) 25 34
Oil cooler fitting-to-water pump 60 81
Oil cooler oil inlet tube screw 40 54
Oil cooler water inlet fitting screw 20 27
OC/OFT fitting-to-oil filter bracket screw 40 54
Torque Specifications for Critical Fasteners (Cont.)
Description
Torque
Lb-Ft N•m
a
English threads.
b
V-MAC applications.
5-101.bk Page 8 Friday, March 17, 2006 11:05 AM