User Manual

Page 2-22
200 SPECIFICATIONS
SPECIAL TOOLS
Special Tool List
Tool No. Description
814 Midget Seal Tool
022001 Jacobs Thickness Gauge, 0.060 inch (1.52 mm)
018781 Jacobs Thickness Gauge, 0.080 inch (2.03 mm)
014177 Jacobs Thickness Gauge, 0.085 inch (2.16 mm)
021327 Jacobs Thickness Gauge, 0.100 inch (2.54 mm)
945-6041 Connecting Rod Fixture (Sweeney)
HT77136 Valve Seat Insert Counterbore
J 21588 Injector Gasket Retriever
J 22738-02 Universal Spring Tester, Model MST 50
J 23442 Piston Ring Compressor
J 2619-01 Slide Hammer
J 26589 Nozzle Insert Carbon Reamer
J 26637-A Thermostat Seal Installer
J 26948 Depth Gauge
J 28452 Injection Pump Drive Coupling Holder R.B.
J 28452-A Injection Pump Drive Coupling Holder
J 29109 Engine Stand
J 29294-B Valve Spring Keeper Remover
J 29296 Valve Yoke Guide Pin Installer
J 29297 Nozzle Sleeve Installer
J 29510 Keystone Piston Ring Groove Gauge
J 29539-15 Top Dead Center Indicator Metric Adapter
J 29539-A Top Dead Center (TDC) Indicator
J 29600-C Fire Ring Groove Cutter
J 29880 Nozzle Sleeve Extractor
J 34046-A Compression Gauge Adapter Set
J 34046-5 Compression Tester Metric Adapter (Used with J 34046-A)
J 34684 Cylinder Head Core Plug Installer (13/16 inch)
J 34687 Cylinder Head Core Plug Installer (1-1/16 inch)
J 35529 Wear Ring and Seal Installer
J 37077 Position Sensor
J 37078 P7100 Series Injection Pump Holding/Alignment Fixture
J 37085 Pump Drive Gear Aligner
J 37092 Dynatard Valve Lash Adjusting Wrench
J 37093 Injection Nozzle Puller
J 37481 Valve Guide Reamer (3/8-inch diameter)
J 37482 Valve Guide Remover (3/8 inch)
5-101.bk Page 22 Friday, March 17, 2006 11:05 AM