User Manual

Page 4-8
200 ENGINE DISASSEMBLY
[215 NU] THERMOSTAT
Refer to Figure 4-8.
1. With the coolant conditioner element
removed, remove two capscrews (13) that
secure the thermostat housing (5) to coolant
manifold (9).
2. Loosen two hose clamps (10) on the
coupling (12) that connects the oil cooler
supply tube (11) to the thermostat housing.
3. Taking care to prevent the thermostat (7)
from falling, remove the thermostat housing
(5) and thermostat. Discard gasket (8).
Figure 4-8 — Coolant Conditioner Removal
1. Capscrew
2. Coolant conditioner head assembly
3. Check valve assembly
4. O-ring
5. Thermostat housing
6. Thermostat seal
7. Thermostat
8. Gasket
9. Coolant manifold
10. Clamps
11. Oil cooler supply tube
12. Coupling
13. Capscrew
14. Coolant conditioner filter element
5-101.bk Page 8 Friday, March 17, 2006 11:05 AM