User Manual

200 ENGINE DISASSEMBLY
Page 4-17
[212 RB & RH] VIBRATION
DAMPER AND CRANKSHAFT
HUB
Refer to Figure 4-19.
1. Remove six mounting capscrews (4) and
turnover bracket, if equipped.
2. Remove vibration damper (3) and fan belt
drive pulley (1) together.
3. Using a 1-7/16 inch wrench, remove
crankshaft hub capscrew (2).
4. Using a suitable puller such as J 24420-C,
remove the crankshaft hub.
Figure 4-19 — Vibration Damper Removal
[261 CK] AIR COMPRESSOR
Refer to Figure 4-20.
Disconnect two coolant lines (1 and 4) from the
air compressor head (2) at the fittings. Tag and
cap lines.
Figure 4-20 — Air Compressor Connections
The air compressor is heavy. Lifting the air
compressor may require the help of an
assistant or suitable lifting device. Attempting
to lift the compressor without such
assistance may result in severe personal
injury.
1. Pulley
2. Capscrew
3. Vibration damper
4. Capscrew
200359a
4
1
2
3
1. Coolant supply line
2. Air compressor head
3. Capscrew
4. Coolant return line
5. Air governor mounting
flange
200258a
1
2
3
4
5
5-101.bk Page 17 Friday, March 17, 2006 11:05 AM