User`s manual

17
2.3.2. Audio Sense Indicator
Off Audio signal is low or no signal
present
On Signal present
This green LED monitors
the presence of audio on
recording input. This is
designed to indicate that
the audio level is
optimum for system
performance. It is not an
absolute reference that
audio is present or not.
2.3.3. Record Indicator
Cause
Off System not in
record setup or
recording.
N/A
Blink Record setup mode Record setup button
This red LED
indicates that
The MacFi-mp
is in record
setup mode or
recording. On Recording Start/Stop button
2.3.4. Record Setup Button
This push button configures the MacFi-mp for record mode.
Pressing this button will cause the record LED to blink, verifying
the MacFi-mp is in record setup mode. Depressing this button
while still in record setup mode will exit this mode and turn off
the record LED. Pressing the button in the middle of the
recording process will have no effect. NOTE: If you have
difficulty recording, verify Memory Protect, Configuration
Switch 8 is OFF( ).
2.3.5. Start/Stop Button
This button will either start or stop the current message. This is
applicable to either record or play modes. Depressing Start/Stop
button while playing or recording will exit the mode and return
system to idle.
If a message is selected for playback, with its number displayed
on the Message Number Display, pressing this button will
initiate the message play. Pressing it again, while the message
is playing, will stop the message play.