User`s manual

19
Display Reads Cause
Cycles through all
segments
No messages to select for playback.
1 - 99 Message number playing or recording
Both Decimals Blink Message location is occupied
Right Decimal Solid Delay, Pause or Repeat configuration
has been modified on MacFi-mpe
FC Bad Block Memory Test*
Hi MacFi-mpe serial port set for 115200**
Lo MacFi-mpe serial port set for 9600**
* Hold Record pushbutton during power up to start Bad Block
Memory Test.
** Hold Sync pushbutton on MacFi-mpe during power up to
toggle between baud rates.
NOTE: In play mode, Select button circulates through only valid
recorded message locations.