User`s manual

23
4. MacFi-mpe ENHANCED FEATURES
The purpose of this section is to document and explain the
added features of the MacFi-mpe. In brief, these features
include RS-232 (Serial) control and Synchronization Relay.
These features also change some physical attributes of the
original MacFi unit. These physical changes include, a 3 position
Euro style connector for serial communications, an RCA type
input for automated sync track encoding, a sync pushbutton for
manual sync track encoding. The sync track relay populates
positions 2 and 3 of Connector 2, which were previously
unused.
For more details on use of the Enhanced Features of the
MacFi-mpe please obtain the User's Manual for this product,
Doc 99-20-044.
4.1 RS-232 (Serial) Command List
CMD Options Description
BAS [<0,+/-12>] Set Message Bass Level.
BBT *Memory Bad Blocks Test.
CFG *Restore Default Configs.
DIR Directory of Message Priority.
DEL [<1-99>] *Delete Message.
DLD [<1-99>] Download MPG Message.
DLY [<0,+/-99>] (+=sec, -=min) Delay Before 1st Play Start.
LST This Commands Listing.
PAS [<0,+/-99>] (+=sec, -=min) Pause Between Play Repeats.
PLS [<1-99>] Number of Plays per Trigger.
PLY [<1-99>,<1-99>,<0,+/-99>] Play Message,Repeat,Delay.
PRI [<1-99>,<E>nable/<D>isable] Set Priority Message,Enable.
REC [<1-99>,<1-99>,<0,+/-99>] Record Message,Delay,Time.
RST Warm Reset System
SHP *Init Configs & Erase Messages.
STP Stop Message Playback.
STS [<0>Off/<1>On] Display Play Status Messages.
SYS Display System Information.
TRE [<0,+/-12>] Set Message Treble Level.
ULD [<1-99>] Upload MPG Message.
* = Confirmation Required