User`s manual

9
2.2.2. Configuration Switches
8 position DIP Switch: UP ( ) position is OFF.
DOWN ( ) position is ON.
This user adjustable dip switch is provided to allow the user to
tailor the operation of the MacFi-mp to meet their demands.
NOTE: Dip switch settings are only established at system
power up. To change settings, disconnect power, change
the dip switch settings, then re-apply power.
12
Play activated message one
times
Play activated message two
times
Play activated message three
times
Number of Plays
For applications where
messages need to be
repeated due to ambient
noise or for clarity. Global
setting for all messages.
When message is
activated through the
remote activation
connector, it will play the
programmed number of
times.
Play activated message four
times*
*This selection may be customized by users of the MacFi-mpe
by using the PLS command for a range of 1 - 99 plays.
34
One second pause between
plays
Five second pause between
plays
Ten second pause between
plays
Pause Between Plays
When the number of
plays is more than one,
this configuration will
insert a pause of the
selected duration
between each play.
Thirty second pause between
plays*
*This selection may be customized by users of the MacFi-mpe
by using the PAS command for a range of 0 - 99 seconds or 0 -
99 minutes.