User Manual

DC16 Owner’s Manual

Mix Selector

The mix selector section – appropriately named “MIXES” – is located on the right-hand side of DC16 just

to the right of the faders. This is the place to select between output mixes, cycle through the displayed

outputs, display output masters, clear all engaged solos and engage the talkback mic.

Also of notice are the eight unmarked buttons to the left of the mix displays.

These are for selecting the corresponding output(s) as indicated in the displays.

Now, the mix selector section already displays a lot of information even before any buttons are pushed,

so let’s discuss that rst. Then we can get into the specics of each button’s function.

The DC16’s mix selector (below left) nearly mirrors that of Master Fader’s mix selector (below right).

This is the top of the mix selector, the default. You may use the (down arrow) page button to view and select

from other mixes.

Additional examples of the mix selector – default and customized! – are on display over the next few pages.

N/A

Default Mix Selector – Page 1

Page

Buttons

Masters

Button

Clear Solo

Button

Talkback

Button

Default Mix Selector – MF