User Manual

DC16 Owner’s Manual
35
Things start to get a little interesting once we get to the subs. As before, push the page down button
to display the subs mixes. The customizations in this example are linking, naming and coloring.
As seen below, Sub1-Sub4 are linked. Sub1-Sub2 retains the same default blue color, but was renamed
to “Kit”. The color of Sub3-Sub4, though, was changed from its default blue to orange. Additionally,
it was renamed to “Choir”.
The mix selector LEDs change to the color of the selected output, letting you know that the channel
faders now control the level of that input to the selected output. As such, the master fader now controls
the level of the selected output. It’s the highlighted Sub1-Sub2 Kit in this example.
When a sub is selected, only the input channels that are associated with the selected sub are displayed.
If no channels have been assigned to a sub – Sub5 and Sub6 in this example – then no channels will be
displayed.
Sub1
Sub5
Sub3
N/A
Sub2
Sub6
Sub4
N/A
Sub3
Sub4
Choir
Sub5
Sub6
Sub1
Sub2
Kit
Sub3
Sub4
Sub5
Sub6
Sub1
Sub2
Master Fader DC16: Subs [Page 4]
DefaultDefault Customized