User Manual

DC16 Owner’s Manual

• HPF Button

This button selects the HPF frequency of all inputs and outputs. High-pass lters are utilized

to cut out low frequencies. The high-pass lter control adjusts the cut-o frequency for the lter.

HPF levels may then be changed by rotating the encoders and turned on [green] or o [gray]

by pushing the encoders below the channel displays. A visual representation may be seen on

the DC16 channel displays and the channel’s EQ screens on Master Fader.

The HPF ranges from O to 700 Hz (inputs) and O to 20 kHz (outputs). The incremental adjustments

are dependent on if the selected EQ is modern or vintage.

The HPF button’s LED illuminates white when engaged.

• LPF Button (ALT + HPF)

This button selects the LPF frequency of all outputs. [There are no LPF on inputs]. Low-pass lters are

utilized to cut out high frequencies. The low-pass lter control adjusts the cut-o frequency for the lter.

LPF levels may then be changed by rotating the encoders and turned on [teal] or o [gray]

by pushing the encoders below the channel displays. A visual representation may be seen on

the DC16 channel displays and the outputs’ EQ screens on Master Fader.

The LPF ranges from O to 20 kHz. [There is no LPF on the vintage EQ].

The LPF button’s LED illuminates white when engaged.

Tom

HPF

HPF HPF HPF

Kick S Top S Btm

HiHat Tom Rack

1 2 3 4 55 6

MON

LPF

LPF LPF LPF

800

LPF LPF LPF

FOH MON MON

MON FOH TB MON TB

LR A1 A2 A3 A4A3 A5