User Manual

ManualsBrandsMackie ManualsAmplificationDC16 - CONTROL SURFACE FOR DIGITAL MIXER DL32R

DC16 Owner’s Manual

• SEND Button

This button selects the sends of all inputs. This allows you to easily change the levels of each channel

sent to auxes and FX.

The send levels may then be changed by rotating the encoders below the channel displays. A visual

representation may be seen on the DC16 channel displays and input routing view on Master Fader.

The send ranges from O to +10 dB.

The send button’s LED illuminates white when engaged.

Simply utilize the editing page buttons to scroll through each of the auxes and FX (and previously

mentioned bank or channel buttons to scroll through the other channels).

For linked auxes, the send level will be displayed rst. See the image above for an example.

Once the (down arrow) channel editing page button is pressed again the send pan will be displayed.

See the image below for an example; same screen just paged down.

The channel editing page button LEDs are always illuminated when they are available for use. If one

of these button LEDs is not illuminated, then the DC16 is at the very top [Aux 1] or very bottom [Dly]

of the sends list. There will always be a minimum of one channel editing page button LED illuminated

when the channel sends are displayed.

• DELAY Button (ALT + SEND)

This button selects the delay time of all outputs. [There is no delay on inputs]. This allows you to easily

change the delay time level of the LR, all auxes and matrices. This is typically used for speaker alignment.

The delay time levels may then be changed by rotating the encoders below the channel displays.

A visual representation may be seen on the DC16 channel displays and input routing view on

Master Fader.

The send ranges from 0.0 ms to 337.8 ms and adjusts in ±10 ms increments (except 330 ms to 337.8 ms).

The delay button’s LED illuminates white when engaged.

S Btm

A3-4 MON

A3-4 MON A3-4 MON A3-4 MON

-40.0

A3-4 MON A3-4 MON A3-4 MON

Kick S Top S Btm

HiHat Tom Rack

1 2 3 4 53 6

Aux

Next Aux

S Btm

A3-4 PAN

A3-4 PAN A3-4 PAN A3-4 PAN

50L

A3-4 PAN A3-4 PAN A3-4 PAN

Kick S Top S Btm

HiHat Tom Rack

1 2 3 4 53 6

MON TB

DELAY

DELAY DELAY DELAY

160

DELAY DELAY DELAY

FOH MON MON

MON FOH TB MON TB

LR A1 A2 A3 A4A5 A5