User Manual
DC16 Owner’s Manual
44
• PAN Button
This button selects the pan and balance of all inputs and outputs.
The pan / balance may then be changed by rotating the encoders below the channel displays.
A visual representation may be seen at the bottom of the DC16 channel displays and on the pan
screen of Master Fader.
As seen in the image below, channel 1 is panned hard left, channel 2 is center panned and channel 3
is panned hard right. So you can see here that a centered pan is located in the middle of the channel
display and anything to the left of that is panned left and anything to the right of that is panned right.
As with Master Fader, what’s panned is dependent on the selected mix. In other words, with...:
• LR selected, the encoder will control the LR pan (as seen above).
• An unlinked aux selected, the encoder will not function and the pan screens will be blank
(as seen below).
• A linked aux selected, the encoder will control either the LR pan or aux pan depending
on the setting of “Use LR Pan” (as seen below).
The pan ranges from 100L to 100R and adjusts in increments of ±10.
The pan button’s LED illuminates white when engaged.
• USER Button (ALT + PAN) [NYI]
The USER button is Not Yet Implemented [NYI], but will eventually allow you to set a custom control
for each channel when used in conjunction with the modiers lock button. Stay tuned!
HiHat
LR PAN
LR PAN LR PAN LR PAN
100L
LR PAN LR PAN LR PAN
Kick S Top S Btm HiHat Tom Rack
1 2 3 4 54 6
Subs
PAN
Kick S Top S Btm HiHat Tom Rack
1 2 3 4 5A1 6
MON
PAN
A3 A4
A3-4 PAN A3-4 PAN A3-4 PAN
100L
A3-4 PAN A3-4 PAN A3-4 PAN
Kick S Top S Btm HiHat Tom Rack
1 2 3 4 5 6
Unlinked
Linked