User Manual

DC16 Owner’s Manual
59
• ASGN + View Group – Pressing and holding the ASGN button while pressing one of the
[Groups Selector] view groups buttons [view group A-F] puts the console into assignment
mode for that view group. The SEL button LEDs of channels that are already assigned to the
chosen view group will ash, indicating that they are assigned to that view group. From here
you’re able to assign and unassign channels to the selected view group simply by pressing
the channels’ SEL button.
More information about view groups may be found on pages 27-28.
• ASGN + Mute Group – Pressing and holding the ASGN button while pressing one of the
[Groups Selector] mute groups buttons [mute group 1-6] puts the console into assignment
mode for that mute group. The SEL button LEDs of channels that are already assigned to the
chosen mute group will ash, indicating that they are assigned to that mute group. From here
you’re able to assign and unassign channels to the selected mute group simply by pressing
the channels’ SEL button.
More information about mute groups may be found on pages 29-30.
• ASGN + Talkback – Pressing and holding the ASGN button while pressing the talkback
button puts the console into assignment mode. The SEL button LEDs of outputs that have
talkback already assigned to them will ash, indicating that they are assigned to talkback.
From here you’re able to assign and unassign outputs to talkback simply by pressing the
outputs’ SEL button (after chosen in the mix selector).
More information about talkback may be found on pages 39, 56.
• LOCK Button – NYI
The LOCK button is Not Yet Implemented [NYI], but will eventually allow you to change the layout
of channels and controls, perform certain lock operations and more. Stay tuned!
Assign Mode:
Song IV
View Group E
Assign Mode:
Song II
Mute Group 3
Assign Mode:
Talkback