User Manual

DC16 Owner’s Manual
73
Hide channel names in selected channel editing:
By default, when a SELECTED channel editing mode is selected, the channel’s names and
numbers are presented in the channel display along with the editing mode characteristics.
However, if you would prefer the channel names and numbers not be there – only displaying
the editing mode characteristics – simply change this setting to “On”.
Rotate the encoder until you see the choice you prefer between:
On
O [Default]
See below for the same exact example of this feature, one with OFF selected and one with
ON selected. Notice the dierence between the two. The choice really comes down to if you
want input and output names and channels displayed or not. Displayed certainly makes
it easier to see what bank you’re on (and what channels are on them), but hiding them may
make it easier to focus on the editing parameters. Regardless of your choice, inputs and
outputs may be selected as always with the selected channel display showing your selection.
Calibrate Faders:
This is simply the place to calibrate the faders. Press the encoder to begin fader calibration.
The channel display will present “In progress...” during fader calibration and “Do it!” when
nished. When wrapped up, the faders will return to the position they were in prior to
calibration. The entire process should only take approximately 10 seconds.
This feature should only be used if the faders aren’t moving or aren’t accurately
representing their positional value. Make sure that the faders are not obstructed
during calibration and do not touch them during calibration.
About:
This is the place to view the settings of this particular DC16. Press the encoder to display similar
settings as seen below. Press the “Cancel” encoder when you are nished with this view.
OH
EQ
EQ EQ TYPE HPF FREQ
Hz
ON MODERN 45
BAND 1 GAIN
dB
9.0
BAND 1 FREQ
Hz
50
BAND 1 Q
1.4
BAND 2 GAIN
dB
7.0
BAND 2 FREQ
Hz
250
Kick
1 2 3 4 5 6 7 8 9
S Top S Btm HiHat OHTom Rack Ch 9
10
Ch 10
OH
EQ
EQ EQ TYPE HPF FREQ
Hz
ON MODERN 45
BAND 1 GAIN
dB
9.0
BAND 1 FREQ
Hz
50
BAND 1 Q
1.4
BAND 2 GAIN
dB
7.0
BAND 2 FREQ
Hz
250
O
On
Dynamic CancelFOH
IP AddressConnected
Mixer Type
Connected
Mixer Name
Connected
Slot Name
IP Mode System
Version
10.0.1.10 18.062
Firmware
Version
18.068DC16DL32R