User Manual
DC16 Owner’s Manual
8
(B) – Push the encoder in to select the DL32R.
(C) – We’ll assume here that you will only be using a single DC16 at this time. Therefore, push the encoder
in to select the FOH slot.
(D) – Once selected, DC16 will ask if you want to auto route Dante and DL32R. Dante Auto Route
congures the headphones, monitors, talkback and stereo playback and recording signals between
the DL32R and DC16. You will almost unequivocally desire to auto route Dante, so push the “Yes”
encoder to conrm. Or press the “No” encoder if you prefer to customize the Dante routing.
(E) – Hang tight and let DC16, DL32R and Dante do its thing then you’ll be on your way!
Do it!
Refresh
Mixer list
Exit
DC16
Initializing...
Connect to
Mixer:
DL32R
Select
DC16
Initializing...
Select
DL32R
connection
FOH
empty
MON
empty
3
empty
4
emptyslot
DC16
Initializing...
Auto Route
Dante and
DL32R
Ye s NoRouting??
DC16
Initializing...
Connecting
to
DL32R
ExitSlot FOH