User Manual
DC16 Owner’s Manual
9
6. Turn the powered speakers (or ampliers) on.
7. Connect an iPad to the iPad Control Port (located on the rear panel of DC16), launch the Master Fader app
and connect to the DL32R / DC16 (as explained in the Master Fader Reference Guide ‘Devices’ section).
8. Set the volume of the source input, starting with channel one.
9. Adjust the channel's mic pre gain until the meters on that channel bounce between green and yellow.
Engage phantom power if needed.
10. Move the channel's fader up to the 0 dB mark.
11. Slowly move the master fader up to a comfortable listening level.
12. Repeat steps 8 to 10 for the other channels.
There are detailed notes outlined in the Master Fader Reference Guide –Chapter 4 : Level
Setting Procedure.