User Manual

DL16S • DL32S Owner’s Manual
10
Appendix A : Hookup Diagrams
Live Sound: House Engineer
Here’s a pretty common setup utilizing the DL32S. Mics are connected to input channels -6 which may be used to mic up
a drum set, guitar and bass cabinets, acoustic guitar, lead and background vocals, a horn section, etc. A pair of synthesizers
are connected to channels 25-26 and 27-28 and a couple of axes into inputs 3 and 32, all via /4" input jacks. And there are
still an additional 0 unused inputs available for extra mics!
Outputs 9-0 are assigned as the L/R main outs [default]. These connect directly to a pair of Thump8S powered subwoofers
which are connected to a pair of Thump5BST powered loudspeakers. Outputs 3-8 are assigned as aux sends -6. These are
sent to six separate Thump2A powered loudspeakers set up as monitors for the band. Outputs -2 are sent to transmitters
for in-ear monitors.
The house engineer will set the LR main mix, as well as get the multitrack recording of the band’s live show utilizing
the multi-plaform device of his/her choice.