User Manual

Master Fader and My Fader Reference Guide
103
FX View
From left to right, each eect displays
the following:
Eect Type — The reverb(s) and delay dis-
play the currently selected eect type (as
a button which reveals a popover when
tapped) and an accompanying image.
These selections are global and
aect all channels sent to the eects.
Eect types are described in more detail
in a few pages.
FX Sends — There are separate vertical
send channel faders and meters, one
for each eect. These control the level
being sent to the eect from the current
channel.
The reverb and delay send meters display
the summed signals from all channel
sends post-send master. Put another way,
this shows the total signal going into the
FX processor regardless of the current
channel being adjusted.
There are no reverb or delay sends from the reverb and delay returns, so when either the reverb
or delay is the current channel, there are no send faders shown as seen in the image below.
FX Settings — The reverb(s) and delay have
multiple sliders which are used to alter the
selected eect. These sliders change dependent
on which eect type is chosen for each channel.
These sliders are global and aect all channels.
The various FX controls for each FX type are
described in more detail in a few pages.
EFFECT TYPE FX SENDS FX SETTINGS FX RETURNS