User Manual

Master Fader and My Fader Reference Guide
104
FX Returns — There are separate vertical return channel faders and meters, one for each eect.
These control the return level from the eect to the selected output. You have seen these before,
as they are the same faders displayed in the mixer view. One exists for each selected output.
Unlike the FX sends, the color of the selected output indicator will change based on the selected
output for the FX returns. See the image below for one example.
Navigate to the delay return channel, then move the channel
fader up and down. Notice that it also moves the delay return
fader up and down. This is because they are both showing the
same level. As such, moving the return delay fader up and down
also moves the delay channel fader up and down. This works
with the reverb return channels and reverb return faders, as well.
There are no reverb or delay returns to the reverb and delay sends (which would be crazy...and it avoids
a feedback loop), so when either the reverb or delay send is the selected output, there are no return faders
as seen in the image below.
LR AUX 4