User Manual
Master Fader and My Fader Reference Guide
137
Recalling a factory preset is easy. Simply tap “Presets” to reveal a popover. The popover displays a list
of factory presets to choose from, as well as the opportunity to...
• store the preset,
• reset the channel and/or
• import/export the preset.
After tapping a preset from the factory preset list, you will be
asked if you want to recall the preset. After tapping the “Yes”
button, you’ll hear the change, but notice that the presets list stays
open. This is an eective way to audition additional presets until
you hear one you like.
Only the Channel ID and DSP settings will change.
Any updates made to the input routing channel
assignments and FX will remain as they are.
Tap anywhere in the mixer or channel view to close the presets popover.
As mentioned above, the other choices here are...:
Store Preset — The store preset button stores the current state of the processing into a new user
preset. After tapping “Store Preset” you will be asked to name the preset.
The name of the preset is the name of the preset, not the channel input, master output, etc.
Reset — The reset button resets the selection [input channel, output channel, DSP, etc.] to its default
state. After tapping the reset button, a conrmation dialog will appear.
Import / Export — Master Fader aords you the opportunity to import and export presets via iTunes,
Dropbox and/or Email. An entire chapter is dedicated to importing and exporting les. This includes
detailed instructions and multiple screenshots every step of the way. Please check it out on pages
211-218.