User Manual

Master Fader and My Fader Reference Guide
149
Wireless — Remove the iPad from the mixer and select the mixer from the wireless list so it’s
highlighted. Feel free to wander the venue and mix with this wireless iPad. Because the iPad is
wireless, working wired (with a DL 1608 / DL806) is not an option until the iPad is reattached to
the mixer. As such, a Running Man logo in the wired list is displayed, but grayed out. However,
the oine selection is not grayed out, indicating that it is available for selection. You might decide
to work oine so your changes don’t aect the mix of the gig currently taking place.
The CURRENT show on the iPad must match the CURRENT show on the mixer. If they do not,
you will be asked to select between the two so they are synced. Why would shows not be
synced? Well, one example could be that current show (X) was used at a gig. The band and
crew then pack up for the next show, but the engineer wants to make some tweaks for the next night’s
performance. The engineer makes a few changes and stores a new snapshot oine; this show now
diers from the CURRENT show that is still on the mixer. What will happen when the iPad is reunited
with the mixer once again? The engineer will be asked which one to use: the current show on the mixer
[X, tap the DL32R/DL1608/DL806 button] or the current show on the iPad [Y, tap the iPad button].
In this case, the engineer would choose the iPad since it contains the latest changes .
DL32R/DL1608/DL806 – tapping the DL32R/DL1608/DL806 button here is considered PULLING
the current show from the mixer and copying it to the iPad. Note that the previous current show
on the iPad is replaced, but an oine copy of the previous show will remain. It will take about
two seconds per snapshot to synchronize the shows. All connected iOS devices will automatically
sync with the current show.
iPad – tapping the iPad button here is considered PUSHING the current show from the iPad and
copying it to the mixer. It will take about two seconds per snapshot to synchronize the shows.
All connected iOS devices will automatically sync with the current show.
Go Oine – tapping the Go Oine button here allows you time to gure things out before deciding
which show to use.
You will also receive the Show Synchronization notication the rst time you power
on the mixer if you tried out the Master Fader app prior to purchasing the mixer.
Each iPad that is oine is unique. In other words, multiple varying snapshots and shows
may be created on each iPad. This is something to be aware of when reconnecting.