User Manual
Master Fader and My Fader Reference Guide
152
Edit / Information — Perhaps you noticed the blue “EDIT” and circled lower case “i” in the Devices
section? These serve a purpose!
Edit allows you to add another device with an IP Address and the blue lower case “i” stands for “info”;
this is where you can rename the mixer and view and edit the Wi-Fi connection.
Information is a good thing...let’s nd out what it does here. Start by tapping it. It displays the
connected device name and IP details.
Perhaps you want to rename the mixer. Wait, did we just say “rename the mixer”. Sure enough, we did.
Here you are physically changing the name on the iPad, but it is indeed the mixer you’re naming.
Why name the mixer anything else other than “DL32R”, “DL1608” or “DL806”? Well, you might have
two (or more) mixers and want to identify between them on the wireless network. Mixers may be
named from either a wired [DL1608 / DL806] or wireless iPad. A maximum of 54 characters may be
used when naming the mixer.
As a hardware setting, the name is stored in the mixer, is global to the mixer and therefore aects
all connected iPads. It is not changed by show or snapshot changes.
Renaming from a wired [DL1608 / DL806] or wireless iPad:
(1) Type in the name you want to call the mixer followed by tapping the “return” button.
(2) A conrmation dialog will appear.
(3) If there is a wired iPad, it stays connected and receives the new name. However, all wireless
iPads become disconnected and you will need to reconnect them as discussed previously in
the devices section (on pages 147-154).