User Manual

Master Fader and My Fader Reference Guide
180
I’ve been working with a band called Oxblood Red, so those are the les I want to transfer. The rst
image shown below are the two open folders side-by-side. On the left side are my personal Oxblood
Red .wav les and on the right side is the portable hard drive’s (empty) “Music” folder awaiting the
les. The second image is showing the les transferring to the “Music” folder.
Something to keep in mind is that the .wav les are listed in alphabetical order. If you
prefer the les be in the order you’ll use them – as I do – simply add a “01” before the rst
track, “02” before the second track, etc.
• Step 5 — Eject and remove the portable hard drive from the computer.
• Step 6 — Connect the portable hard drive back to the DL32R mixer.
If the mixer was turned o, you will have to power it up and head back
to the recording and playback view. If the mixer was left on, you might
need to tap the “Refresh” button. This is located just above the previously
tapped “Format” and “Eject” buttons. Either way, the les you transferred
from the computer to the hard drive are now prominently displayed in
the music playback list (as seen below).