User Manual

Master Fader and My Fader Reference Guide
185
From here, we’re able to start recording (and play it back later) using standard transport controls.
Notice that most buttons are currently grayed out. That’s because there are no les available for
playback yet. We need to record rst. Left to right, the buttons are:
• Go to the beginning of the track.
• Rewind the track 10 seconds.
• Stop track recording / playback.
• Pause track playback.
• Play track.
• Start recording.
• Fast forward the track 10 seconds.
• Go to the end of the track.
• Step 4 — Tap the record button and recording will begin immediately.
A few things to notice in the image above (top to bottom):
• The international symbol for a recording in progress is a red dot. One will
appear above the record/playback button on the navigation bar on all
connected iPads.
• The name of the recording in progress [“Test”] is displayed in the upper-left corner
of the multichannel record/playback screen. Also displayed here are the record
time, amount of hard drive space left and amount of record time remaining.
• The record button illuminates green when engaged; it is gray when disengaged.
• The name, number of tracks and bit depth cannot be changed while recording is in progress.
• The name is not listed in the playback list; this is because the recording has not yet nished.