User Manual

Master Fader and My Fader Reference Guide
196
Eects Controls
Mute Reverb(s) / Delay — Tapping the reverb and/or delay mute button in
the quick access panel is akin to tapping the LR mute button at the top of the
reverb and/or delay channel strip. However, with the quick access panel, you
now have easier access to the eects controls regardless of what view is open.
For example, let’s say you’re adjusting the EQ on channel three. One option
is to go back to the mixer view, swipe left until the eects channels are visible,
tap the eect’s mute buttons, swipe right to head back to channel three and
nally tap its EQ curve to continue where you left o......or simply leave the
channel three EQ open, tap the quick access panel, tap the eect’s mute
button, then continue to adjust the channel three EQ without missing a beat!
Like the eect’s channels mute buttons, the quick access eect’s mute buttons are also global.
Additionally, they illuminate the same red color when engaged and are gray when disengaged.
Tap Delay — Tapping the tap delay button in the quick access panel is akin to tapping the tap delay
button in the FX view. However, with the quick access panel, you now have easier access to the tap
delay regardless of what view is open.
For example, let’s say you’re adjusting the gate on channel nine. One option is to swipe up to the
FX view, tap the tap delay button to the desired setting, then swipe back down to the comp/gate view
to continue where you left o......or simply leave the channel nine comp/gate view open, tap the quick
access panel, tap the tap delay button to the desired setting, then continue to adjust the channel nine
gate without missing a beat!
Monitor
Monitor — These sliders control the monitor delay (D) and level (L) for the monitor
bus. For example, if you are mixing from the back of the venue, you are going to
want to align the main PA with the remote level. This is the place.
The delay time ranges from a low of 0.0 ms (m, ft) to a maximum of 336.6 ms
(115.8 m, 380.1 ft). The level ranges from a low of o (–∞) up to a maximum
of +10 dB. These may be adjusted by moving the sliders left and right. Additionally, exact settings may
be entered into the current parameter display.
Talkback
Talkback — The DL32R has a talkback level (L) and button. Channel 32 is the
default for the talkback input. The talkback level slider controls the level of the
talkback mic with the gain ranging from –∞ to +10 dB. Talkback may be routed to
the main L/R, any subgroup, aux send and/or matrix. Refer to the I/O patch on
pages 164-175 for more information.
The talkback button operates in a latching manner. Tap the talkback button to engage
and the buton illuminates. Tap again to disengage and the button will return to its gray (o)
state.
DL32RDL1608 / DL806
Stereo Tap DelayMono Tap Delay