User Manual
Master Fader and My Fader Reference Guide
209
Before tapping the Yes button, let’s discuss the load button for a moment...but only for a moment!
Load — Load is an option we did not see in the “Current Shows” section. That’s because the current
show is the loaded show! Load is only available in the “Oine Shows” section and will load the selected
show (including all of the snapshots associated with the show) as the Current Show.
Ok, now tap the Yes button!
After loading, the Current Show will display the Headliner show and all of its snapshots. Now tap
the Oine Shows button to see an image similar to what is displayed below. Notice that Support
is no longer the green button...Headliner is!
As stated on the Load Show popover, the load time is all dependent on the number of stored snapshots
on the show. It can take up to two seconds per snapshot and 30 seconds per image to transfer.
The current state of the console is not changed on a show load, audio still passes and you can still
adjust all mix controls. However, in reality, you will probably want to wait to recall a snapshot from
the new show after loading the show completes.
As a reminder, loading a show will replace the current show on the mixer with the new show.
All connected iOS devices will also load the new show. This will create a copy of it on
each iOS device so it may be used oine in the future, if needed.
At this point, a new show has been created and named, but it’s time to create some snapshots.
Simply follow the same steps as you did for the original show [Support - Oxblood Red].
That’s basically it. When tapping an unloaded show [gray button], the only other choices in the
popover include Name, Image, Duplicate and Export. All except Delete work exactly like they
do for the Current Show. Only Oine Shows may be deleted, not the Current Show. So let’s take
a gander at Delete.
Delete — As mentioned above, the delete button deletes the currently selected show and all of its
snapshots. This is a permanent deletion with no undo, so a conrmation dialog helps prevent accidents.
Import / Export — Master Fader aords you the opportunity to import and export oine shows via iTunes,
Dropbox and/or Email. An entire chapter is dedicated to importing and exporting les. This includes detailed
instructions and multiple screenshots every step of the way. Please check it out on pages 211-218.